Table of Contents
Advertisement
Fiber cabling
Optical interfaces
....................................................................................................................................................................................................................................
Application packs
Connector type
....................................................................................................................................................................................................................................
4 - 5 4
The following pack types are available:
•
OP155M
•
OP622M
•
OP2G5
•
OP10G
•
OP40G.
See
"Specifications for LambdaUnite
(C-15)
for order codes and specifications.
Important! Only the fiber cables with listed comcode are allowed to
Cables
be used , otherwise the proper functioning of the system can not be
guaranteed.
The fiber types are:
•
SM-minicord BreakOut cable
•
SM-simplex cable.
LC connector with an angled Boot 40-45 degrees for termination to
port units. Blue connector for SM, beige connector for MM. The LC
boot must remain freely rotatable around the connector length axis
after termination, in order to adjust its orientation to the fiber routing
direction without damaging the fiber.
Lucent Technologies
System cabling and final assembly
™
MSS optical circuit packs"
Issue a, April 2002
365-374-074
Advertisement
Table of Contents
