M120 Multiservice Edge Router Hardware Guide
See Also
Installing an M120 Fan Tray
Figure 67: Installing an M120 Upper Front Fan Tray
192
M120 Cooling System Description on page 19
Maintaining the M120 Fan Trays on page 264
Troubleshooting the M120 Cooling System on page 286
Installing an M120 Fan Tray on page 192
To install a fan tray (see
Figure 67 on page 192
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray by its handle and insert it straight into the chassis. Note the correct
2.
orientation by the "this side up" label on the top surface of the fan tray.
Tighten the captive screws on each side of the fan tray faceplate to secure it in the
3.
chassis.
Lower the cable management system back into position, if necessary.
4.
and
Figure 68 on page
193):
Copyright © 2018, Juniper Networks, Inc.