Table 17: Accessory Box Parts List For An Mx104 Router - Juniper MX104 Hardware Manual

MX104 3D Universal Edge Router Hardware Guide
Related
Documentation
46
Table 16: Parts List for a Fully Configured MX104 Router (continued)
Component
Blank panels for slots without components installed

Table 17: Accessory Box Parts List for an MX104 Router

Component
AC power cord (AC chassis only)
USB media kit
Phillips screws, 10-32 x 1/2, with square cone sems washers
Phillips screws, M3 x 10 mm, with square cone sems washers
Ground terminal lug, two hole, sized for #10 screws, 14 AWG
Philips screws, 6-32 x 1/4 in.
DC power ring terminal 6-14 AWG
RJ-45 cable with RJ-45 Jack to female DB-9
ESD wrist strap with cable
Read Me
Affidavit for T1 connection
Documentation card
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
NOTE: You must provide additional mounting screws if needed that are
appropriate for your rack or cabinet to mount the chassis on a rack or a
cabinet.
MX104 3D Universal Edge Router Overview on page 3
Unpacking an MX104 Router on page 47
Quantity
One blank panel for each slot not
occupied by a component
Quantity
2
1
2
2
1
4
6
1
1
1
1
1
1
1
1
Copyright © 2014, Juniper Networks, Inc.