Configuring A Time Range - HP FlexNetwork NJ5000 User Manual

Step
Configuring a rule for an advanced IPv6
4.
ACL.

Configuring a time range

Select QoS > Time Range from the navigation tree.
1.
Click the Add tab.
2.
Figure 428 Adding a time range
Configure a time range as described in
3.
Click Apply.
4.
Table 133 Configuration items
Item
Time Range Name
Periodic
Time
Range
Absolute
Time
Range
Description
Set the name for the time range.
Start Time Set the start time of the periodic time range.
Set the end time of the periodic time range. The end time
End Time
must be greater than the start time.
Sun, Mon,
Select the day or days of the week on which the periodic
Tue, Wed,
time range is valid. You can select any combination of the
Thu, Fri, and
days of the week.
Sat.
Set the start time and date of the absolute time range. The
From time of the day is in the hh:mm format (24-hour clock),
and the date is in the MM/DD/YYYY format.
Set the end time and date of the absolute time range. The
To
time of the day is in the hh:mm format (24-hour clock),
Remarks
Complete one of the tasks according to the ACL
category.
Table 133.
386
You can define
both a periodic
time range and
an absolute
time range to
add a
compound time
range. This
compound time
range recurs on
the day or days
of the week
only within the
specified