HP FlexNetwork NJ5000 User Manual page 400

Figure 430 Configuring a basic IPv4 ACL
Configure a rule for a basic IPv4 ACL.
3.
Click Add.
4.
Table 135 Configuration items
Item
ACL
Rule ID
Action
Check Fragment
Check Logging
Description
Select the basic IPv4 ACL for which you want to configure rules.
Available ACLs are basic IPv4 ACLs.
Select the Rule ID box and enter a number for the rule.
If you do not specify the rule number, the system will assign one
automatically.
If the rule number you specify already exists, the following operations modify
the configuration of the rule.
Select the action to be performed for IPv4 packets matching the rule:
•
Permit—Allows matched packets to pass.
•
Deny—Drops matched packets.
Select this box to apply the rule to only non-first fragments.
If you do no select this box, the rule applies to all fragments and
non-fragments.
Select this box to keep a log of matched IPv4 packets.
A log entry contains the ACL rule number, operation for the matched
packets, protocol number, source/destination address, source/destination
port number, and number of matched packets.
This function is not supported.
388