HP FlexNetwork NJ5000 User Manual page 334

Figure 347 Local user configuration page
Configure the local user as described in
3.
Click Apply.
4.
Table 114 Configuration items
Item
Username
Password
Confirm
Password Encryption
Group
User-type
Level
Service-type
Expire-time
Description
Specify a name for the local user.
Specify and confirm the password of the local user.
The settings of these two fields must be the same.
Select a password encryption method: Reversible or Irreversible.
Select a user group for the local user.
For information about user group configuration, see
Select a user type for the local user: Common User, Security Log Administrator,
or Guest Administrator.
Only the Common User option takes effect on this software version.
Select an authorization level for the local user: Visitor, Monitor, Configure, or
Management, in ascending order of priority.
This option takes effect on only Web, FTP, Telnet, and SSH users.
Select the service types for the local user to use, including Web, FTP, Telnet, LAN
access (Ethernet access service such as 802.1X), and SSH.
If you do not specify any service type for a local user who uses local authentication,
the user cannot pass authentication and therefore cannot log in.
The service type of the guest administrator and security log administrator is Web.
Specify an expiration time for the local user, in the HH:MM:SS-YYYY/MM/DD
format.
To authenticate a local user with the expiration time configured, the access device
322
Table 114.
"Configuring a user group."