HP FlexNetwork NJ5000 User Manual page 212

Figure 200 Adding GigabitEthernet 1/0/1 to VLAN 100
Create VLAN-interface 100:
3.
a. From the navigation tree, select Network > VLAN Interface.
b. Click the Create tab.
c. Enter 100 in the VLAN ID field.
d. Select Configure Primary IPv4 Address.
e. Select Manual.
f. Enter 192.168.1.2 in the IPv4 Address field.
g. Enter 24 or 255.255.255.0 in the Mask Length field.
h. Click Apply.
200