HP FlexNetwork NJ5000 User Manual page 88

Figure 70 Adding an alarm entry
Configure an alarm entry as described in
4.
Click Apply.
5.
Table 33 Configuration items
Item
Alarm variable:
Static Item
Interface Name
Sample Item:
Interval
Sample Type
Owner:
Alarm:
Create Default Event
Rising Threshold
Rising Event
Table 33.
Description
Set the traffic statistics that are collected and monitored. For
more information, see Table
Set the name of the interface whose traffic statistics are
collected and monitored.
Set the sampling interval.
Set the sampling type:
•
Absolute—Absolute sampling to obtain the value of the
variable when the sampling time is reached.
•
Delta—Delta sampling to obtain the variation value of
the variable during the sampling interval when the
sampling time is reached.
Set the owner of the alarm entry.
Select whether to create a default event.
The description of the default event is default event, the
action is log-and-trap, and the owner is default owner.
If there is no event, you can create the default event. And
when the value of the alarm variable is higher than the alarm
rising threshold or lower than the alarm falling threshold, the
system adopts the default action log-and-trap.
Set the alarm rising threshold.
Set the action that the system takes when the value of the
alarm variable is higher than the alarm rising threshold.
76
34.