The page for displaying SNMP packet statistics appears.
Figure 97 SNMP packet statistics
SNMPv1/v2c configuration example
Network requirements
As shown in
(agent) at 1.1.1.1/24, and the switch automatically sends traps to report events to the NMS.
Figure 98 Network diagram
Configuring the agent
Enable SNMP:
1.
a. Select Device > SNMP from the navigation tree.
The SNMP configuration page appears.
b. Select the Enable option, and select the v1 and v2c options.
c. Click Apply.
Figure
98, the NMS at 1.1.1.2/24 uses SNMPv1 or SNMPv2c to manage the switch
97