HP FlexNetwork NJ5000 User Manual page 148

b. Select Auto in the Voice VLAN port mode list.
c. Select Enable in the Voice VLAN port state list.
d. Enter voice VLAN ID 2.
e. Select GigabitEthernet 1/0/1 on the chassis front panel.
f. Click Apply.
Figure 141 Configuring voice VLAN on GigabitEthernet 1/0/1
Add OUI addresses to the OUI list:
5.
a. Click the OUI Add tab.
b. Enter OUI address 0011-2200-0000.
c. Select FFFF-FF00-0000 in the Mask list.
d. Enter description string test.
e. Click Apply.
Figure 142 Adding OUI addresses to the OUI list
Verifying the configuration
When the preceding configurations are completed, the OUI Summary tab is displayed by
1.
default, as shown in
address.
Figure 143. You can view the information about the newly-added OUI
136