Configuring An Alarm Entry - HP FlexNetwork NJ5000 User Manual

Click Add.
3.
Figure 68 Adding an event entry
Configure an event entry as described in
4.
Click Apply.
5.
Table 32 Configuration items
Item
Description
Owner
Event Type

Configuring an alarm entry

Select Device > RMON from the navigation tree.
1.
Click the Alarm tab.
2.
Figure 69 Alarm entry
Click Add.
3.
Table
Description
Set the description for the event.
Set the entry owner.
Set the actions that the system takes when the event is triggered:
•
Log—The system logs the event.
•
Trap—The system sends a trap in the community name of null.
If you select both Log and Trap, the system logs the event and sends a trap.
If neither is selected, the system takes no action.
75
32.