HP FlexNetwork NJ5000 User Manual page 328

Figure 339 Configuring the HWTACACS authentication server
d. Click Apply.
The HWTACACS Server Configuration area displays the added HWTACACS server, as
shown in Figure
Figure 340 Displaying the added HWTACACS server
Configure the HWTACACS authorization server:
3.
a. In the HWTACACS Server Configuration area, click Add.
b. Select Primary Authorization from the Server Type list.
c. Enter 10.1.1.1 in the IP Address field.
d. Enter 49 in the Port field.
e. Enter expert in the Key and Confirm Key fields.
f. Click Apply.
Configure the HWTACACS accounting server:
4.
a. In the HWTACACS Server Configuration area, click Add.
b. Select Primary Accounting from the Server Type list.
c. Enter 10.1.1.1 in the IP Address field.
d. Enter 49 in the Port field.
e. Enter expert in the Key and Confirm Key fields.
f. Click Apply.
Configure the parameters for communication between the HPE NJ5000 5G PoE+ switch and
5.
the HWTACACS server:
a. From the navigation tree, select Authentication > HWTACACS.
b. Click the Modify icon
c. In the Common Configuration area, select Without domain name from the Username
Format list, as shown in
d. Click Apply.
340.
for the HWTACACS scheme system.
Figure 341.
316