HP FlexNetwork NJ5000 User Manual page 380

Figure 404 Secure MAC address list
When the maximum number of MAC addresses is reached, intrusion protection is triggered.
2.
Select Device > Port Management from the navigation tree, and then select the Detail tab.
On the page, click the target port (GigabitEthernet 1/0/3 in this example) to view details.
Figure 405 shows that the port state is inactive.
Figure 405 Displaying port state
Re-select GigabitEthernet 1/0/3 to refresh its data 30 seconds later.
3.
Figure 406 shows that the port state is active.
368