Configuration Procedure - HP FlexNetwork NJ5000 User Manual

Figure 51 Network diagram

Configuration procedure

Adding a local mirroring group
From the navigation tree, select Device > Port Mirroring.
1.
Click Add to enter the page for adding mirroring groups as shown in
2.
Figure 52 Adding a local mirroring group
Enter 1 for Mirroring Group ID, and select Local from the Type list.
3.
Click Apply.
4.
Configuring GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as the source ports
Click Modify Port.
1.
Select 1 – Local from the Mirroring Group ID list.
2.
Select Mirror Port from the Port Type list.
3.
Select both from the Stream Orientation list.
4.
60
Figure 52.