Removing Arp Entries; Configuring Gratuitous Arp - HP FlexNetwork NJ5000 User Manual

Figure 196 Add a static ARP entry
Configure the static ARP entry as described in
3.
Click Apply.
4.
Table 80 Configuration items
Item
IP Address
MAC Address
Advanced
Options

Removing ARP entries

From the navigation tree, select Network > ARP Management.
1.
The default ARP Table page appears, as shown in
Remove ARP entries:
2.
To remove specific ARP entries, select the boxes of target ARP entries, and click Del
Selected.
To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
To remove all static ARP entries, click Delete Static.
To remove all dynamic ARP entries, click Delete Dynamic.

Configuring gratuitous ARP

From the navigation tree, select Network > ARP Management.
1.
Click the Gratuitous ARP tab.
2.
Description
Enter an IP address for the static ARP entry.
Enter a MAC address for the static ARP entry.
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the
Port
port must belong to the VLAN. The corresponding VLAN interface must have
been created.
Table 80.
Figure 195.
197