HP FlexNetwork NJ5000 User Manual page 258

Item
Enable HTTPS
service
Certificate
HTTPS
Port Number
ACL
Description
Enable or disable the HTTPS service.
The HTTPS service is disabled by default.
Select a local certificate for the HTTPS service from the Certificate
dropdown list.
You can configure the certificates available in the dropdown list in
Authentication > Certificate Management. For more information, see
"Managing certificates."
IMPORTANT:
If no certificate is specified, the HTTPS service generates its own
certificate.
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure the port is not used by any other
service.
Associate the HTTPS service with an ACL. Only the clients that pass
the ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
246