HP FlexNetwork NJ5000 User Manual page 37

Figure 15 Management IP address configuration page
Configure the parameters as described in
2.
Table 12 Configuration items
Item Description
Select a VLAN interface.
Available VLAN interfaces are those configured in the page that you enter by selecting
Network > VLAN Interface and selecting the Create tab.
Select VLAN
The IP address of a VLAN interface can be used as the management IP address to
Interface
access the device. Configure a VLAN interface and its IP address in the page that you
enter by selecting Network > VLAN Interface. For more information, see
VLAN
Enable or disable the VLAN interface.
When errors occurred in the VLAN interface, disable the interface and then enable the
port to bring the port to operate correctly.
By default, the VLAN interface is down if no Ethernet ports in the VLAN is up. The
VLAN is in the up state if one or more ports in the VLAN are up.
Admin status
Disabling or enabling the VLAN interface does not affect the status of the Ethernet
ports in the VLAN. That is, the port status does not change with the VLAN interface
status.
interfaces."
IMPORTANT:
25
Table 12.
"Configuring