Configuring A Time Range - HP 1910 User Manual

Step
2. Adding an IPv6 ACL
3. Configuring a rule for a basic IPv6 ACL
4. Configuring a rule for an advanced IPv6
ACL

Configuring a time range

Select QoS > Time Range from the navigation tree.
1.
Click the Create tab to enter the time range configuration page.
2.
Figure 446 Adding a time range
Configure a time range as described in
3.
Click Apply.
4.
Table 133 Configuration items
Item
Time Range Name
Remarks
Required
Add an IPv6 ACL. The category of the added IPv6 ACL
depends on the ACL number that you specify.
Required
Complete one of the tasks according to the ACL category.
Table
Description
Set the name for the time range.
425
133.