HP FlexNetwork NJ5000 User Manual page 180

The system maps VLAN 10 to MSTI 1 and adds the VLAN-to-instance mapping entry to the
VLAN-to-instance mapping list.
i. Repeat the preceding three steps to map VLAN 20 to MSTI 2 and VLAN 30 to MSTI 3 and
add the VLAN-to-instance mapping entries to the VLAN-to-instance mapping list.
j. Click Activate.
Figure 169 Configuring an MST region
Configure MSTP globally:
2.
a. From the navigation tree, select Network > MSTP.
b. Click the Global tab.
c. Select Enable from the Enable STP Globally list.
d. Select MSTP from the Mode list.
e. Select the box before Instance.
f. Set the Instance ID field to 1.
g. Set the Root Type field to Primary.
h. Click Apply.
168