Step
2.
Adding an IPv4 ACL
3.
Configuring a rule for a basic IPv4 ACL
4.
Configuring a rule for an advanced IPv4 ACL
5.
Configuring a rule for an Ethernet frame header
ACL
Recommended IPv6 ACL configuration procedure
Step
1.
Configuring a time range
2.
Adding an IPv6 ACL
3.
Configuring a rule for a basic IPv6 ACL
4.
Configuring a rule for an advanced IPv6 ACL
Configuring a time range
1.
Select QoS > Time Range from the navigation tree.
2.
Click the Create tab.
Remarks
Required.
Add an IPv4 ACL. The category of the added ACL
depends on the ACL number that you specify.
Required.
Complete one of the following tasks according to the
ACL category.
Remarks
Optional.
Add a time range. A rule referencing a time range
takes effect only during the specified time range.
Required.
Add an IPv6 ACL. The category of the added IPv6 ACL
depends on the ACL number that you specify.
Required.
Complete one of the tasks according to the ACL
category.
478