Configuring Hwtacacs Communication Parameters For The Scheme - HP FlexNetwork NJ5000 User Manual

Figure 332 Add HWTACACS Server page
Configure the server parameters as described in
3.
Click Apply.
4.
Table 111 Configuration items
Item
Server Type
IP Address
Port
Key
Confirm Key
Configuring HWTACACS communication
parameters for the scheme
In the Common Configuration area of the Modify HWTACACS Scheme page, configure the
1.
username format as described in
Expand the advanced settings, as shown in
2.
Description
Select the server type, including:
•
Primary Authentication.
•
Primary Authorization.
•
Primary Accounting.
•
Secondary Authentication.
•
Secondary Authorization.
•
Secondary Accounting.
Enter the IP address of the server. This task is required.
The primary server and the secondary server cannot use the same IP
address.
Enter the TCP port number of the server.
If you leave this field blank, the default port number is used.
Enter the shared key of the server in the Key field, and confirm it in the
Confirm Key field.
The HWTACACS client (the HPE NJ5000 5G PoE+ switch) and HWTACACS
server use the MD5 algorithm to encrypt packets exchanged between them
and use a shared key to verify the packets. Make sure the HWTACACS server
and client use the same shared key for secure communication.
Table 112.
Figure
311
Table 111.
333.