Enabling Snmp Agent - HP FlexNetwork NJ5000 User Manual

Task
Configuring an SNMP view
2.
Configuring an SNMP group
3.
Configuring an SNMP user
4.
Configuring SNMP trap
5.
function
Displaying SNMP packet
6.
statistics

Enabling SNMP agent

Select Device > SNMP from the navigation tree.
1.
The SNMP configuration page appears.
Remarks
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP agent is disabled, all SNMP agent-related configurations are
removed.
Optional.
After creating SNMP views, you can specify an SNMP view for an
SNMP group to limit the MIB objects that can be accessed by the
SNMP group.
Required.
After creating an SNMP group, you can add SNMP users to the group
when creating the users. Therefore, you can realize centralized
management of users in the group through the management of the
group.
Required.
Before creating an SNMP user, you need to create the SNMP group to
which the user belongs.
IMPORTANT:
After you change the local engine ID, the existing SNMPv3 users
become invalid, and you must re-create the SNMPv3 users. For more
information about engine ID, see
Optional.
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host (usually the NMS)
of the SNMP traps.
The SNMP agent sends traps to inform the NMS of important events,
such as a reboot.
By default, an agent is allowed to send SNMP traps to the NMS.
Optional.
87
"Enabling SNMP agent."