Configuration Procedure - HP FlexNetwork NJ5000 User Manual

Configuration procedure

Configuring Router A
Enable IPv6 multicast routing, assign an IPv6 address to each interface, enable IPv6 PIM-DM on
each interface, and enable MLD on GigabitEthernet 1/0/1. (Details not shown.)
Configuring Switch A
Create VLAN 100:
1.
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter 100 as the VLAN ID.
d. Click Apply.
Figure 228 Creating VLAN 100
Assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to VLAN 100:
2.
a. Click the Modify Port tab.
b. Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 in the Select
Ports area.
c. Select Untagged for Select membership type.
d. Enter 100 as the VLAN ID.
e. Click Apply.
225