HP FlexNetwork NJ5000 User Manual page 110

Figure 99 Configuring the SNMP agent
Configure a read-only community:
2.
a. Click the Community tab.
b. Click Add.
The Add SNMP Community page appears.
c. Enter public in the Community Name field, and select Read only from the Access Right
list.
d. Click Apply.
Figure 100 Configuring an SNMP read-only community
Configure a read and write community:
3.
a. Click Add on the Community tab page.
The Add SNMP Community page appears.
b. Enter private in the Community Name field, and select Read and write from the Access
Right list.
c. Click Apply.
98