HP FlexNetwork NJ5000 User Manual page 301

Figure 304 Network diagram
Configuration procedure
Enable the Telnet server function, and configure the switch to use AAA for Telnet users.
1.
(Details not shown.)
Configure IP addresses for the interfaces. (Details not shown)
2.
Configure a local user:
3.
a. Select Device > Users from the navigation tree.
b. Click the Create tab.
c. Enter the username telnet.
d. Select the access level Management.
e. Enter the password abcd and confirm the password.
f. Select the password encryption method Irreversible.
g. Select the service type Telnet Service.
h. Click Apply.
Figure 305 Configuring a local user
Configure ISP domain test:
4.
a. Select Authentication > AAA from the navigation tree.
The domain configuration page appears.
b. Enter the domain name test.
c. Click Apply.
289