HP FlexNetwork NJ5000 User Manual page 426

Figure 450 Setting a traffic behavior
Configure other actions for a traffic behavior as described in
3.
Click Apply.
4.
Table 151 Configuration items
Item
Please select a behavior
Enable/Disable
CIR
CBS
CAR
Red
Filter
Description
Select an existing behavior in the list.
Enable or disable CAR.
Set the committed information rate (CIR), the average traffic rate.
Set the committed burst size (CBS), number of bytes that can be sent
in each interval. This function is not supported in the current software
version, and it is reserved for future support.
Set the action to perform for exceeding packets.
After selecting the Red box, you can select one of the following
Discard
options:
•
Discard—Drops the exceeding packet.
•
Pass—Permits the exceeding packet to pass through.
Pass
This function is not supported in the current software version, and it is
reserved for future support.
Configure the packet filtering action.
After selecting the Filter box, select one item in the following list:
•
Permit—Forwards the packet.
•
Deny—Drops the packet.
414
Table 151.