Configuring A Rule For A Basic Ipv6 Acl - HP FlexNetwork NJ5000 User Manual

Item
Match Order
Description

Configuring a rule for a basic IPv6 ACL

Select QoS > ACL IPv6 from the navigation tree.
1.
Click the Basic Setup tab.
2.
The rule configuration page for a basic IPv6 ACL appears.
Figure 434 Configuring a rule for a basic IPv6 ACL
Add a rule for a basic IPv6 ACL.
3.
Click Add.
4.
Table 139 Configuration items
Item
Select Access
Control List (ACL)
Rule ID
Operation
Description
Select a match order for the ACL. Available values are:
•
Config—Packets are compared against ACL rules in the order the rules are
configured.
•
Auto—Packets are compared against ACL rules in the depth-first match
order.
Set the description for the ACL.
Description
Select the basic IPv6 ACL for which you want to configure rules.
Select the Rule ID box and enter a number for the rule.
If you do not specify the rule number, the system will assign one automatically.
If the rule number you specify already exists, the following operations modify the
configuration of the rule.
Select the operation to be performed for IPv6 packets matching the rule:
394