Configuring Authorization Methods For The Isp Domain - HP FlexNetwork NJ5000 User Manual

Item
NOTE:
The HPE NJ5000 5G PoE+ switch does not support PPP authentication and portal authentication.

Configuring authorization methods for the ISP domain

Select Authentication > AAA from the navigation tree.
1.
Click the Authorization tab.
2.
Figure 302 Authorization method configuration page
Select the ISP domain and specify authorization methods for the ISP domain, as described
3.
in Table
Click Apply.
4.
Table 103 Configuration items
Item
Select an ISP domain
Default AuthZ
Name
Secondary Method
LAN-access AuthZ
Name
Description
•
RADIUS—RADIUS authentication. You must specify the RADIUS scheme to
be used.
•
Not Set—The device uses the settings in the Default AuthN area for login
users.
103.
Description
Select the ISP domain for which you want to specify authentication methods.
Configure the default authorization method and secondary authorization method for
all types of users.
Options include:
•
HWTACACS—HWTACACS authorization. You must specify the HWTACACS
scheme to be used.
•
Local—Local authorization.
•
None—This method trusts all users and assigns default rights to them.
•
RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be
used.
•
Not Set—The device uses the default authorization setting, which is local
authorization.
Configure the authorization method and secondary authorization method for LAN
access users.
286