HP FlexNetwork NJ5000 User Manual page 73

Select 1 (GigabitEthernet 1/0/1) and 2 (GigabitEthernet 1/0/2) on the chassis front panel.
5.
Figure 53 Configuring the source ports
Click Apply.
6.
A configuration progress dialog box appears.
After the success notification appears, click Close.
7.
Configuring GigabitEthernet 1/0/3 as the monitor port
Click Modify Port.
1.
Select 1 – Local from the Mirroring Group ID list.
2.
Select Monitor Port from the Port Type list.
3.
Select 3 (GigabitEthernet 1/0/3) on the chassis front panel.
4.
Figure 54 Configuring the monitor port
Click Apply.
5.
A configuration progress dialog box appears.
After the success notification appears, click Close.
6.
61