HP FlexNetwork NJ5000 User Manual page 113

Configuring the agent
Enable SNMP agent:
1.
a. Select Device > SNMP from the navigation tree.
The SNMP configuration page appears.
b. Select the Enable option, and select the v3 option.
c. Click Apply.
Figure 105 Configuring the SNMP agent
Configure an SNMP view:
2.
a. Click the View tab.
b. Click Add.
The page for creating an SNMP view appears.
c. Type view1 in the View Name field.
d. Click Apply.
Figure 106 Creating an SNMP view (1)
e. On the page that appears, select the Included option, type the MIB subtree OID interfaces,
and click Add.
f. Click Apply.
A configuration progress dialog box appears.
g. Click Close after the configuration process is complete.
101