HP FlexNetwork NJ5000 User Manual page 257

Figure 254 Service management
Enable or disable services on the page.
2.
Click Apply.
3.
Table 95 Configuration items
Item
Enable FTP
service
FTP
ACL
Enable Telnet
Telnet
service
Enable SSH
SSH
service
Enable SFTP
SFTP
service
Enable HTTP
service
Port Number
HTTP
ACL
Table 95 describes the detailed configuration items.
Description
Enable or disable the FTP service.
The FTP service is disabled by default.
Associate the FTP service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Enable or disable the Telnet service.
The Telnet service is disabled by default.
Enable or disable the SSH service.
The SSH service is disabled by default.
Enable or disable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
Enable or disable the HTTP service.
The HTTP service is enabled by default.
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure the port is not used by any other
service.
Associate the HTTP service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
245