HP FlexNetwork NJ5000 User Manual page 292

Figure 296 Configuring 802.1X globally
Configure 802.1X for GigabitEthernet 1/0/1:
2.
a. In the Ports With 802.1X Enabled area, click Add.
b. Select GigabitEthernet1/0/1 from the Port list.
c. Click Apply.
Figure 297 Configuring 802.1X for GigabitEthernet 1/0/1
Verifying the configuration
After the user passes authentication and gets online, use the ping command to test whether ACL
3000 takes effect.
From the navigation tree, select Network > Diagnostic Tools.
1.
The ping page appears.
Enter the destination IP address 10.0.0.1.
2.
Click Start.
3.
Figure 298 shows the ping operation summary.
280