HP FlexNetwork NJ5000 User Manual page 327

Figure 335 Page for adding an HWTACACS scheme
b. Click Add.
The Add HWTACACS Scheme page appears, as shown in
Figure 336 Creating the HWTACACS scheme system
c. Click Apply.
The added HWTACACS scheme is displayed, as shown in
Figure 337 Displaying the added HWTACACS scheme
Configure the HWTACACS authentication server:
2.
a. On the page in
b. In the HWTACACS Server Configuration area, click Add.
Figure 338 Adding an HWTACACS server
c. On the Add HWTACACS Server page, configure the following parameters, as shown
in Figure 339:
− Select Primary Authentication from the Server Type list.
− Enter 10.1.1.1 in the IP Address field.
− Enter 49 in the Port field.
− Enter expert in the Key and Confirm Key fields.
Figure 337, click the Modify icon
315
Figure 336.
Figure 337.
for the HWTACACS scheme system.