Figure 87 Creating an SNMP view (2)
Table 40 Configuration items
Item
View Name
Rule
MIB Subtree OID
Subtree Mask
Adding rules to an SNMP view
Select Device > SNMP from the navigation tree.
1.
Click the View tab.
2.
The page in
Click the
3.
The Add rule for the view ViewDefault window appears.
Description
Set the SNMP view name.
Select to exclude or include the objects in the view range determined by the
MIB subtree OID and subtree mask.
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system).
MIB subtree OID identifies the position of a node in the MIB tree, and it can
uniquely identify a MIB subtree.
Set the subtree mask, a hexadecimal string. Its length must be an even
number in the range of 2 to 32.
If no subtree mask is specified, the default subtree mask (all Fs) will be used
for mask-OID matching.
Figure 85
appears.
icon of the target view.
90