Managing ports
You can use the port management feature to set and view the operation parameters of a Layer 2
Ethernet port and an aggregate interface.
•
For a Layer 2 Ethernet port, these operation parameters include its state, speed, duplex mode,
link type, PVID, description, MDI mode, flow control settings, MAC learning limit, and storm
suppression ratios.
•
For an aggregate interface, these operation parameters include its state, link type, PVID,
description, and MAC learning limit.
Setting operation parameters for a port
Select Device > Port Management from the navigation tree.
1.
Click the Setup tab.
2.
Figure 41 The Setup tab
Set the operation parameters for the port as described in
3.
Click Apply.
4.
Table
48
21.