Configuring Basic Port Security Control - HP FlexNetwork NJ5000 User Manual

Table 124 Configuration items
Item
Enable Port Security
Advanced

Configuring basic port security control

From the navigation tree, select Authentication > Port Security.
1.
On the Port Security page, the Security Ports And Secure MAC Address List area displays
the port security control settings, as shown in
Figure 394 Security Ports And Secure MAC Address List area
Click Add.
2.
The page for applying port security control appears.
Figure 395 Configuring basic port security control
Configure basic port security control settings as described in
3.
Click Apply.
4.
Description
Specify whether to enable the port security feature globally.
By default, port security is disabled.
Configure intrusion protection actions globally.
Intrusion protection actions:
•
Temporarily Disabling Port Time—Sets the time length for how long the port
is disabled temporarily upon receiving illegal frames. Traps Switch—Selects
one or more events to trigger trap sending. The following is the available
events:
MAC Learned.
802.1X-Auth Failure.
8021X Logoff.
802.1X Logon.
Intrusion.
MAC-Auth Failure.
MAC-Auth Logoff.
MAC-Auth Logon.
362
Figure 394.
Table 125.