HP FlexNetwork NJ5000 User Manual page 379

Figure 402 Configuring port security
Configuring the basic port security control
In the Security Ports And Secure MAC Address List area, click Add.
1.
On the page that appears, select GigabitEthernet1/0/3.
2.
Enter 3 as the maximum number of MAC addresses.
3.
Select Enable Intrusion Protection, and select Disable Port Temporarily from the list.
4.
Click Apply.
5.
Figure 403 Applying the port security feature
Verifying the configuration
Display the secure MAC address entries learned and manually configured on port
1.
GigabitEthernet 1/0/3. The maximum number of secure MAC is configured as 3, so up to 3 MAC
addresses can be learned and added as secure MAC addresses, as shown in
367
Figure 404.