Step
3.
Configuring a rule for a basic IPv4
4.
Configuring a rule for an advanced IPv4
5.
Configuring a rule for an Ethernet frame header
Recommended IPv6 ACL configuration procedure
Step
1.
Configuring a time
2.
Adding an IPv6
3.
Configuring a rule for a basic IPv6
4.
Configuring a rule for an advanced IPv6
Configuring a time range
1.
Select QoS > Time Range from the navigation tree.
2.
Click the Add tab.
Figure 445 Adding a time range
3.
Configure a time range as described in
ACL.
range.
ACL.
ACL.
ACL.
Remarks
Required.
ACL.
Complete one of the following tasks according to
the ACL category.
ACL.
Remarks
Optional.
Add a time range. A rule referencing a time range takes
effect only during the specified time range.
Required.
Add an IPv6 ACL. The category of the added IPv6 ACL
depends on the ACL number that you specify.
Required.
Complete one of the tasks according to the ACL category.
Table
137.
453