Chapter 3 Tutorials
3.2.2 Dialing Rule for PSTN
The following sections show you how to create outbound dialing rules (also referred to as
Least Cost Routing or LCR).
The LCRs determine which outside line the X6004 should use to complete outbound calls. In
our example we want to use the PSTN1 outbound line group to complete local calls.
Figure 31 Outbound Calls via PSTN
1001
Procedure:
1 In the web configurator, click Configuration > PBX > Outbound Line Management >
LCR to open the following screen.
Figure 32 Configuration > PBX > Outbound Line Management > LCR
2 Click the Edit icon in the local_call section to open the following screen. Select the
outbound line group from the pool column that you want to add to this LCR (in our
example this is IPPBX_001:PSTN1 as configured in
click the Right icon to move them to the Selected column. Click Apply to save the
outbound line group in the LCR and then click the Add icon to configure a dial
condition.
52
local_call
FXO
Section 3.2.1 on page
PSTN
49), then
X6004 User's Guide