Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 132 Maintenance > Administrator List
LABEL
Administrator List
Delete
Username
Description
Rank
Add / Edit / Delete Click Add to configure a new administrator account on the X2002.
27.3.1 Add an Administrator
This screen allows you to create new administrator accounts. To display, click Maintenance >
Administrator List > Add.
Figure 273 Maintenance > Administrator List > Add
The following table describes the labels in this screen.
Table 133 Maintenance > Administrator List > Add
LABEL
Create a new administrator
Username
Password
Confirm
Password
Description
X2002 User's Guide
DESCRIPTION
Check the Delete box and click Delete to remove this account from the X2002.
This field displays the username of an administrator account on the X2002.
This field displays the description of an administrator account on the X2002.
This field displays the rank of an administrator account on the X2002. This field
displays:
•
Full admin - if this account is allowed to perform all configuration changes on
the X2002.
•
Debug admin - If this account is allowed to perform all configuration changes
on the X2002. This type of account is reserved for use by service technicians.
•
Read only - if this account is only able to view configuration details on the
X2002.
Click Edit to edit an existing administrator account on the X2002.
Click Delete to remove an administrator account from the X2002.
DESCRIPTION
Type a username for this administrator. You can use up to 20 alphanumeric
characters. Spaces are not allowed. The first character must be a letter.
Type a password for this administrator account. You can use up to 32
alphanumeric characters and spaces are not allowed.
Retype the new password for this administrator account.
Type a short description for this administrator account. You can use up to 63
alphanumeric characters. Spaces are allowed.
Chapter 27 Administrator Accounts
311
Advertisement
Table of Contents
