Trusted Peer Configuration; Add/Edit Trusted Peer; Figure 149 Did Mapping Setting; Figure 150 Add/Edit Trusted Peer - ZyXEL Communications IP PBX X6004 User Manual

Figure 149 DID Mapping Setting

Each field is described in the following table.

Table 69 DID Mapping Setting

LABEL
Partial Mapping
Match Part
Match Digit(s)
Apply
Cancel

18.6 Trusted Peer Configuration

Trusted peers refer to connections to another SIP server (for example another X6004) that has
configured your X6004 as a trusted peer. Your organization may want to use trusted peer
connections between remote branch offices.

18.6.1 Add/Edit Trusted Peer

The screens for editing or adding trusted peers on the X6004 contain the same fields. Only the
screen used to add a trusted peer is shown below. Click the Add (or Edit) icon in the Trusted
Peer section of the Outbound Line Group configuration screen to view the screen as shown.

Figure 150 Add/Edit Trusted Peer

X6004 User's Guide
DESCRIPTION
Select Enable to have the X6004 inspect either the first or the last digits of
incoming telephone numbers and to check them against the extensions
configured on the X6004.
Select Disable to have the X6004 inspect the entire telephone number of
incoming calls against the extensions configured on the X6004.
Specify whether to inspect the first or the last set of digits of incoming calls and
compare them against the extensions on the X6004.
Specify how many digits the X6004 should inspect and compare against the
extensions configured on the X6004.
Click this to save your changes.
Click this to go to the Auto-Attendant screen without saving your changes.
Chapter 18 Outbound Line Group
171