Set Call Access Code Screen; Internal Extension Length; Figure 139 Configuration > Pbx > Extension Management > Call Access Code: Edit/Add; Figure 140 Configuration > Pbx > Extension Management > Call Access Code > Internal Extension - ZyXEL Communications IP PBX X6004 User Manual

Chapter 17 Call Access Code

17.1.1 Set Call Access Code Screen

Use this screen to edit or create an access code on the X6004. To access this screen, click the
Edit or Add icons in the Call Access Code screen.
Figure 139 Configuration > PBX > Extension Management > Call Access Code: Edit/Add
Each field is described in the following table.
Table 60 Configuration > PBX > Extension Management > Call Access Code: Edit/Add
LABEL
Set Call Access
Code
Group
Access Code
Apply
Cancel

17.1.2 Internal Extension Length

Specify the length range of phone numbers for internal calls. The X6004 treats these calls as
an extension to extension call and does not try to use an outside line when making these calls.
If the length of the number dialed fits in this range, but the extension does not exist on the
X6004 then the call is dropped.
Click Configuration > PBX > Extension Management > Call Access Code > Internal
Extension Length, to view the screen as shown.
Figure 140 Configuration > PBX > Extension Management > Call Access Code > Internal
Extension Length
160
DESCRIPTION
Select the authority group you want to configure a call access code for. You can
only create one call access code per authority group.
Type the access code for this authority group.
Click this to save your changes.
Click Cancel to return to Call Access Code screen without saving your changes.
X6004 User's Guide