Debug Nvram - Cisco 4500M Command Reference Manual

debug nvram

debug nvram
To debug NVRAM activity, use the debug nvram command. To disable debugging output, use the no
form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to debug NVRAM:
Switch# debug nvram
NVRAM behavior debugging is on
Switch#
Related Commands
undebug nvram (same as no debug nvram)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-58
debug nvram
no debug nvram
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01