Show System Switchover - Juniper EX9200 Features Manual

High Availability Feature Guide for EX9200 Switches

show system switchover

List of Syntax
Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Syntax (MX Series
Router)
Release Information
Description
316
Syntax on page 316
Syntax (TX Matrix Router) on page 316
Syntax (TX Matrix Plus Router) on page 316
Syntax (MX Series Router) on page 316
show system switchover
show system switchover
<all-chassis | all-lcc | lcc number | scc>
show system switchover
<all-chassis | all-lcc | lcc number | sfc number>
show system switchover
<all-members>
<local>
<member member-id>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
sfc
Command introduced in Junos OS Release 13.2X51-D20 for QFX Series switches.
Display whether graceful Routing Engine switchover is configured, the state of the kernel
replication (ready or synchronizing), any replication errors, and whether the primary and
standby Routing Engines are using compatible versions of the kernel database.
NOTE: Issue the
Routing Engine. This command is not supported on the master Routing Engine.
because the
kernel-replication
Routing Engine. This process runs only on the backup Routing Engine.
Beginning Junos OS Release 9.6, the
been deprecated on the master Routing Engine on all routers other than a
TX Matrix (switch-card chassis) or a TX Matrix Plus (switch-fabric chassis)
router.
However, in a routing matrix, if you issue the
on the master Routing Engine of the TX Matrix router (or switch-card chassis),
the CLI displays graceful switchover information for the master Routing
Engine of the T640 routers (or line-card chassis) in the routing matrix.
Likewise, if you issue the
Routing Engine of a TX Matrix Plus router (or switch-fabric chassis), the CLI
displays output for the master Routing Engine of T1600 or T4000 routers in
the routing matrix.
show system switchover command only on the backup
process daemon does not run on the master
show system switchover
show system switchover
show system switchover
command has
command
command on the master
Copyright © 2017, Juniper Networks, Inc.