Show Dhcp Relay Binding - Juniper EX3400 Features Manual

DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

show dhcp relay binding

Syntax
Release Information
Description
Options
372
show dhcp relay binding
<address>
<brief>
<detail>
<interface interface-name>
<interfaces-vlan>
<interfaces-wildcard>
<ip-address | mac-address>
<logical-system logical-system-name>
<routing-instance routing-instance-name>
<summary>
Command introduced in Junos OS Release 8.3.
Options interface and mac-address
Options interfaces-vlan and interfaces-wildcard added in Junos OS Release 12.1.
Command introduced in Junos OS Release 12.1X48R3 for PTX Series Packet Transport
Routers.
Display the address bindings in the Dynamic Host Configuration Protocol (DHCP) client
table.
address—(Optional) Display DHCP binding information for a specific client identified by
one of the following entries:
ip-address—The specified IP address.
mac-address—The specified MAC address.
session-id—The specified session ID.
brief—(Optional) Display brief information about the active client bindings. This is the
default, and produces the same output as
detail—(Optional) Display detailed client binding information.
interface interface-name—(Optional) Perform this operation on the specified interface.
You can optionally filter on VLAN ID and SVLAN ID.
interfaces-vlan—(Optional) Show the binding state information on the interface VLAN
ID and S-VLAN ID.
interfaces-wildcard—(Optional) The set of interfaces on which to show binding state
information. This option supports the use of the wildcard character (*).
logical-system logical-system-name—(Optional) Perform this operation on the specified
logical system.
routing-instance routing-instance-name—(Optional) Perform this operation on the
specified routing instance.
added in Junos OS Release 8.4.
show dhcp relay binding
Copyright © 2017, Juniper Networks, Inc.
.