10-Gigabit Ethernet Sfp+ Ports; Alarm Contact Port On The Acx2200 Router; Table 11: Sfp+ Port Features - Juniper ACX2200 Hardware Manual

ACX2200 Universal Access Router Hardware Guide

10-Gigabit Ethernet SFP+ Ports

Related
Documentation

Alarm Contact Port on the ACX2200 Router

18
Table 10: SFP Port Features (continued)
Feature
Port numbering (hardware)
Port numbering (software)
The XE ports described in
NOTE: You can use Gigabit Ethernet transceivers in the
use 10-Gigabit Ethernet transceivers in the
a time.

Table 11: SFP+ Port Features

Feature
Supported standards
Cable
Connector
Port numbering (hardware)
Port numbering (software)
ACX2200 Universal Access Router Overview on page 3
Front Panel of an ACX2200 Router on page 13
LEDs on ACX2200 Routers on page 15
The ACX2200 router has four external alarm contacts (also known as potential free
contacts) for connecting the router to external alarm devices. The port labeled
uses a 15-pin D-type connector. The external alarm contact has 15 pins that accept a
single core wire from external alarm devices. A DE15 alarm cable is required to connect
the ACX2200 router to external alarm devices. Use the gauge wire appropriate for the
external device that you are connecting.
Whenever a system condition triggers an alarm, the alarm relay contacts are activated,
which in turn activates the external alarm devices. The alarm setting is open or closed.
Description
through and
0/1/0 0/1/3 0/2/0
through and
ge-0/1/0 ge-0/1/3
Table 11 on page 18 support SFP+ transceivers.
Description
See the Hardware Compatibility Tool for the specifications of
transceivers supported on the ACX2200. The list of supported
transceivers for the ACX2200 is located at
https://pathfinder.juniper.net/hct/product/#prd=ACX2200
and
0/3/0 0/3/1
and
xe-0/3/0 xe-0/3/1
through
0/2/1
through
ge-0/2/0 ge-0/2/1
ports, or you can
GE
XE ports. Use one set of ports at
ALARM
Copyright © 2017, Juniper Networks, Inc.
.