4.5.10
LED board (LEDB)
(1)
Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(2)
Disconnect 3 connectors.
Notes:
When installing the harness, be careful not to
insert it at an angle.
(3)
Remove 2 screws and take off the LED
board [1].
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 42
[1]
Fig. 4-123
Fig. 4-124
[1]