Flywheel (E-Studio356/456/506 / 357/457/507); Registration Roller Clutch (Clt2) - Toshiba e-STUDIO206L Service Manual

4.9.24

Flywheel (e-STUDIO356/456/506 / 357/457/507)

(1) Take off the rear cover.
 P. 4-3 "4.1.6 Rear cover"
(2) Remove 1 screw and then remove 4
flywheels.
4.9.25

Registration roller clutch (CLT2)

(1) Take off the flywheel.
 P. 4-78 "4.9.24 Flywheel (e-STUDIO356/
456/506 / 357/457/507)"
(2) Remove 2 screws and then take off the
clutch cover.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
(3) Disconnect 1 connector and then take off the
registration roller clutch.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Flywheel
Fig. 4-220
Clutch cover
Fig. 4-221
Registration roller clutch
Fig. 4-222
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 78