Toshiba e-STUDIO206L Service Manual page 90

A reduction-type 3-line CCD for color processing is used for e-STUDIO207L/257/307/357/457/507. An
LED is adopted for the exposure lamp. The SYS board supplies power to the exposure lamp and
controls the entire scanner unit. Therefore, no SLG board and LED board are embedded.
[11] [1]
[12]
[1] RADF original glass
[2] Carriage-2
[3] Reflector
[4] Exposure lamp
[5] Carriage-1
[6] Original glass
[7] Drive pulley
[8] CCD board
[9] Lens
[10] Automatic original detection sensor
[11] Carriage home position sensor
[12] Platen sensor
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
OUTLINE OF THE MACHINE
[2] [3] [4]
Fig. 3-25
3 - 42
[5] [6]
[9] [8]
[10]
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
[7]