Auto-Toner Sensor (S8); Drum Thermistor (Thms4) - Toshiba e-STUDIO206L Service Manual

4.12.6

Auto-toner sensor (S8)

(1) Remove the developer material
( P. 4-101 "4.12.3 Removing developer
material").
(2) Place the developer unit upside down.
Disconnect 1 connector.
(3) Take off the auto-toner sensor by rotating it.
4.12.7

Drum thermistor (THMS4)

(1) Remove the developer material
( P. 4-101 "4.12.3 Removing developer
material").
(2) Disconnect 1 connector, remove 1 screw and
take off the drum thermistor.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Connector
Fig. 4-292
Auto-toner sensor
Fig. 4-293
Drum thermistor
Connector
Fig. 4-294
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 103
DISASSEMBLY AND REPLACEMENT
4